2007 hpdi nmea plug location

[Gaston Mike]

Looked and searched for it all over the engine, 225 hpdi

Could someone help me find this thing?

Thanks

[rangerguy]

If you will look on the drivers side of the motor, it will be laying right in the bottom of the cowling right under that big cannon plug. It is really hard to see, but it is there. It has a plug in the end of it and is white in color. They didn't put allot of spare wire on it, so it is a little hard to get pulled up to where you can plug your interface cable into it, but it can be done. Pull out the plug and plug our cable into it and run it to your NMEA 2000 network.

[Gaston Mike]

Thanks, Thats right were it was. 0 slack in it and a pain but its done and working fine, Thank you again!!!!!!!!!

[rangerguy]

[spider1]

Ron you the man!

[rangerguy]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by spider1 &raquo;</td></tr><tr><td class="quote">Ron you the man! </td></tr></table>

Had a good teacher Spider.