Results 1 to 3 of 3
  1. #1
    Member roboworm2002's Avatar
    Join Date
    Dec 2007
    Location
    Rome City
    Posts
    1,250

    Problemn ProV 200

    1993 ProV 200 never had the first problem started it up this morning off the trailer and had NO POWER at all, was fishing a classic so went ahead and fished but could only go at an idle speed all day no matter if the throttle was wide open or not, motor back fires all the time while running, while sitting in neutral at idle it will backfire and die......... ANY thoughts ???????
    SECOND PLACE IS NOT AN OPTION

  2. Member
    Join Date
    Aug 2008
    Location
    lakemoor,il
    Posts
    1,424
    #2

    Re: Problemn ProV 200 (roboworm2002)

    i had a similiar issue once.on my rig it wasnt getting full ignition due to the tether switch not being totally seated.i know it sounds odd but at the time there was a guy at the boat ramp that recognized the issue and told me to unplug and replug the cord and it worked!im assuming the last outing previuos to this it was good?


    NOT ALL WHO WANDER ARE LOST!!!!!!

  3. Member roboworm2002's Avatar
    Join Date
    Dec 2007
    Location
    Rome City
    Posts
    1,250
    #3

    Re: Problemn ProV 200 (hanker71)

    WOW who would of thunk of that ????? I took in to the shop and havent heard anything yet but lets you have the right answer there, it would be a shole lot cheaper than lets say a power head.......... thanks for your input
    SECOND PLACE IS NOT AN OPTION

Similar Threads

  1. my Prov 190
    By rome258 in forum Blazer Boats
    Replies: 6
    Last Post: 02-03-2011, 02:13 PM
  2. 180 ProV - 190 ProV
    By headhigh in forum Blazer Boats
    Replies: 10
    Last Post: 11-10-2010, 03:16 PM
  3. 200 ProV
    By Booyah21 in forum Yamaha Motors
    Replies: 4
    Last Post: 06-15-2009, 05:35 PM
  4. 180 prov set up
    By blublazer in forum Blazer Boats
    Replies: 2
    Last Post: 07-26-2007, 07:10 AM
  5. 210 ProV
    By HD in forum Blazer Boats
    Replies: 1
    Last Post: 02-27-2006, 02:07 PM