Does anyone know if Yamaha has a connector to the 225 HPDI computer to allow it to hook ("T") into the Lowrance net? I'd like to display info such as hours, psi, rpms, etc. on my 332c at the console. My boat will be pre wired with the Lowrance network. Thanks - Duane
Allison XB21 2+2, Merc 250 ProXS, 1.62 Sportmaster, Hydromotive Engineering X-OB 29
Excel 1751 Viper F4, Tohatsu 50 4-stroke, EZ-Trac trailer
FeelFree Lure 11.5 Kayak
Are you getting the new Yamaha "Command Link" gauges with the associated NMEA-2000 LAN Hub? If so then yes your Lowrance will plug right into that hub and pull some info off the '07 HPDI ECU. The '07 HPDI's and bigger 4-strokes are NMEA-2000 compliant. If the Lowrance equipment you're using is NMEA-2000 compliant it can plug into the Yamaha hub and you're good to go.
-Mike
"All 2007-model Yamaha EFI outboards from 50hp upwards, and HPDI 2-stroke models, are now fitted with the necessary ECU-to-LAN connection port, bringing this easy-to-fit, easy-to-maintain system within reach of a great many boat owners. Boat builders and dealers too, are showing great enthusiasm for this new digital instrument system, which makes installation and maintenance far simpler than ever before; and thanks to its open architecture, nav aids and electronics from any other manufacturer using the NMEA 2000 protocol can be linked easily to the network."
Hold My Beer And Watch This !
Reply With Quote