Results 1 to 12 of 12
  1. #1
    Member
    Join Date
    Jul 2005
    Location
    Northport AL
    Posts
    123

    New gearcase on 06 etec

    I tore my foot up a week ago and it is getting replaced with the new 2012 gearcase. It is a high-performing SLE (Straight Leading Edge) gearcase with nose-cone pick-ups that significantly increases water flow to the engine and provides increased cooling ability and capacity. High-quality gears with super pure, extra-tough metallurgy. And stiffer engine mounts for superior handling and control at high speeds.

    My question is is it going to be faster?? Also I am running a 26 raker 2. Will I have to change props because of the bigger gears?

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2

    Re: New gearcase on 06 etec (Mackay1981)

    You didn't tell us which engine?

    If you have a lightning gearcase, it may a few mph slower.

    The M2 will have much more water pressure so be sure to get the new muffler and exhaust assembly with it so the old one will not blow off and ruin your motor by water ingestion.
    -----


    A Technical troubleshooter possessing more tools than talent !

  3. Wolf Hunter bigbass225's Avatar
    Join Date
    May 2005
    Location
    Menomonie WI
    Posts
    2,423
    #3

    Re: New gearcase on 06 etec (SEAHORSE)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by SEAHORSE &raquo;</td></tr><tr><td class="quote">You didn't tell us which engine?

    If you have a lightning gearcase, it may a few mph slower.

    The M2 will have much more water pressure so be sure to get the new muffler and exhaust assembly with it so the old one will not blow off and ruin your motor by water ingestion.</td></tr></table>

    If you had a lightning gearcase there wont be a question about losing a few MPH it will just happen(no it will not be faster)! Other then that just what seahorse said

  4. Member
    Join Date
    Jul 2005
    Location
    Northport AL
    Posts
    123
    #4

    Re: New gearcase on 06 etec (bigbass225)

    200 e-tec HO. The mechanic told me he had to put a new water pump on it. He also said that I will probably need a bigger prop. Right now I am running a tr196 with the 26 raker 2, hydro jack plate and getting 72 to 74

  5. Wolf Hunter bigbass225's Avatar
    Join Date
    May 2005
    Location
    Menomonie WI
    Posts
    2,423
    #5

    Re: New gearcase on 06 etec (Mackay1981)

    Your gear ratio is the same on the 200hp motor so prop size shouldnt be an issue! He prolly put a new impeller on it but you need to make sure what seahorse said was done or you could have engine damage!

  6. Member
    Join Date
    Jul 2005
    Location
    Northport AL
    Posts
    123
    #6

    Re: New gearcase on 06 etec (bigbass225)

    What is seahorse

  7. Member Melton Jason's Avatar
    Join Date
    May 2009
    Location
    Knoxville TN
    Posts
    4,403
    #7

    Re: New gearcase on 06 etec (Mackay1981)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Mackay1981 &raquo;</td></tr><tr><td class="quote">What is seahorse
    </td></tr></table>

    The person that stated this

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by SEAHORSE &raquo;</td></tr><tr><td class="quote">You didn't tell us which engine?

    If you have a lightning gearcase, it may a few mph slower.

    The M2 will have much more water pressure so be sure to get the new muffler and exhaust assembly with it so the old one will not blow off and ruin your motor by water ingestion. </td></tr></table>

    Stroker DC21 Mercury 250 XB

  8. Member
    Join Date
    Jul 2005
    Location
    Northport AL
    Posts
    123
    #8

    Re: New gearcase on 06 etec (89 hydrasport)

    thanks ill let him know

  9. Member
    Join Date
    May 2010
    Location
    Perkinston
    Posts
    844
    #9

    Re: New gearcase on 06 etec (Mackay1981)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Mackay1981 &raquo;</td></tr><tr><td class="quote">What is seahorse
    </td></tr></table>


    I just woke my wife up laughing at this.

    Seahorse is an ancient smartass mechanic.




  10. Member santee bass's Avatar
    Join Date
    Nov 2004
    Location
    Manning
    Posts
    4,444
    #10

    Re: New gearcase on 06 etec (Mackay1981)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Mackay1981 &raquo;</td></tr><tr><td class="quote">What is seahorse
    </td></tr></table>

    Just a naked miniature horse that likes to swim around in the ocean. I think that about sums him up!!!

  11. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #11

    Re: New gearcase on 06 etec (Mackay1981)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Mackay1981 &raquo;</td></tr><tr><td class="quote">

    What is seahorse

    </td></tr></table>

    Just a filament of your imagination !
    -----


    A Technical troubleshooter possessing more tools than talent !

  12. Wolf Hunter bigbass225's Avatar
    Join Date
    May 2005
    Location
    Menomonie WI
    Posts
    2,423
    #12

    Re: New gearcase on 06 etec (SEAHORSE)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by SEAHORSE &raquo;</td></tr><tr><td class="quote">

    Just a filament of your imagination !</td></tr></table>

    Pretty close!!!!

Similar Threads

  1. Lightning gearcase vs standard gearcase on 2001 Evinrude 200 hp RAM Ficht
    By GamblerSam in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 02-25-2012, 07:16 PM
  2. 250 etec HO, M2 gearcase, another update
    By rodbender1 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-07-2011, 02:59 PM
  3. 2008 250 Etec HO gearcase
    By cjaswegan in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-03-2011, 01:36 PM
  4. gearcase question on 225 etec
    By 92javelin in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 11-12-2008, 02:50 PM
  5. Etec change gearcase oil
    By smpescador in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-25-2007, 07:59 PM