First Images

[Flippin 416]

Since I finally figured out how to collect snapshot images, I thought I would share a few that I took this Tuesday at one of our local lakes. I welcome all input and suggestions to make tthings better. Do you see any fish in the images??

I am guessing that this is an old barn foundation?



And this is a small bridge I found on a roadbed.

[RoughThumbBG]

It looks like you are getting some hard object interference. Those white lines in the water column makes it seem that your transducer is picking up either your motor, hull, or most likely jackplate.

Other than that they are some pretty good images. The sharpness seems a little high and maybe a little too much sensitivity.

As for fish you can see balls of bait in the water column in the top pic. there may be some fish on the far side of the foundation. Probably be easier to tell with less sharpness and more contrast.


Good start

[Coonhound]

Definitely getting some feedback from your jackplate or something, like RoughThumbBG said.

On the bottom image, on the left side about an inch below the road there's a fish for sure suspended. It also looks like a couple fish above the road, just above the sonar shadow of the guardrail.

Good shots!

[Doug Vahrenberg]

Ditto abd Ditto...

Might want to lower the transducer to get past the bloackage on the left side.

[Flippin 416]

I have the Transducer Shield and Saver without the lowering adapter on a 10" Slidemaster....I will get the lowering adapter and see how that works. Thanks for the input.