Here's a quick and cheap line stripper. Take a piece of 2x2 board approx. 6 to 8 inches long and screw a 3 inch screw or nail a 20 penny nail in the end as close to center as possible. Grind or clip the head of the screw or nail off. Take your electric/cordless drill and place the screw/nail in the drill. Now you have a cheap high speed stripper. Electric drills work better, more rpm and no battery drain.
I do something similiar... took a 20 oz platic pop bottle top, driller a hole in it and put a bolt thru with a nut on the outside. You can hook it into ur drill, attach a pop bottle and away you go. When all ur line is off simply unscrew the cap from the bottle and throw away the bottle!
Have you got a picture of that setup by any chance?
I just pull up to a mailbox and tie on to it. Press your bail drive, it on uff every tomi GUARANTEED
SD
A rednecks last dying words..........hold my beer .......and watch this!!
I do it with out the 2x2. Not sure why you use that.
Alan
__________________________________________________ _________
Free men are not equal. Equal men are not free.
Superdave I was thinkin the same thing
Now dats funnie rite dare!!!!
sorry Bill... been out of town. I dont have a pic and unfortunately dont have a digital camera. If u need a further explanation gimme a shout and I'll try my best to explain it a little better!
Reply With Quote