Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2009
    Location
    berne
    Posts
    15

    etec propshaft

    i have a 2006 etec 225 ho, sn#05152701 mod#e 225dhlsdf..while doing my yearly maintance,,changing water pump,,gear case oil...i happened to notice i have a little vertical movement in my prop shaft..how much is to much????? went through my service manual could not find any specifications..this unit has flawless ...any numbers would be appreciated...thank you for your help before..bad sendor on oil pump... <br /><br />
    Modified by halfbass at 10:12 AM 5/26/2010<br /><br />
    Modified by halfbass at 1:09 PM 5/26/2010


    Modified by halfbass at 1:11 PM 5/26/2010

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,120
    #2

    Re: etec propshaft (halfbass)

    As in end play?

  3. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #3

    Re: etec propshaft (halfbass)



    As in about 1/8"?
    -----


    A Technical troubleshooter possessing more tools than talent !

  4. Member
    Join Date
    Jun 2009
    Location
    berne
    Posts
    15
    #4

    Re: etec propshaft (halfbass)

    thank you again,, i knew about the end play, i just noticed the the vertical play,,i was worried about the carrier...i am running it very close to the surface....oil look good no fileing,,,once had a big johnson!!!! but i realy love the big blue...thank you and take care...go fish...

Similar Threads

  1. Opti 225 cooling problem - might have found the problem
    By taeheel2az in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 2
    Last Post: 09-18-2011, 10:07 AM
  2. Livewell problem, well sorta a problem 07 ZX190
    By Codys10147 in forum Skeeter Boats
    Replies: 5
    Last Post: 06-01-2008, 02:43 AM
  3. ignition problem or fuel problem?
    By wildmaninal in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 03-27-2008, 03:23 PM