Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2010
    Location
    Lexington, NC
    Posts
    382

    08 225 Etec HO Problem

    I bought a new left over 08 Ranger Z20 with 225 ETEC HO and have had it out about six times. Somewhere around 6 to 8 hours run time and it let me down on the water today. It was running fine all morning and then just went from about 40 mph to practically nothing and sounded funny. It will start sometimes, but hold hot foot all the way down and will not build rpm. Does anyone have any suggestions??

    Thanks,

    Stan




    Modified by StanS at 5:16 PM 5/15/2010
    Thanks,

    Stan Stone
    Lexington, NC (High Rock Lake)

    https://youtube.com/c/StanStoneFishing

  2. Member
    Join Date
    Mar 2008
    Location
    Bastian
    Posts
    1,245
    #2

    Re: 08 225 Etec HO Problem (StanS)

    sounds like its in slow mode...or safe mode, overheat,water in gas,and several other things will cause it, its a safety feature,but something has caused it, if that is what it is
    01,225,HO,Rude Ram,1;86 gears 93,nitro 190 76.6gps,26tro4 m#E225FHLSIF,S#G04956186

  3. Member
    Join Date
    Mar 2010
    Location
    Lexington, NC
    Posts
    382
    #3

    Re: 08 225 Etec HO Problem (rude power)

    What is safe mode? Do you know how to tell if it is in safe mode? Can low oil cause the engine to go into safe mode? I didn't notice any alarm lights or horn.

    Thanks,

    Stan
    Thanks,

    Stan Stone
    Lexington, NC (High Rock Lake)

    https://youtube.com/c/StanStoneFishing

  4. Member
    Join Date
    Mar 2010
    Location
    Lexington, NC
    Posts
    382
    #4

    Re: 08 225 Etec HO Problem (StanS)

    Looks like my issue is an injector problem. Nothing major........John with David Fritts Outdoors is already on top of it. Glad I purchased my boat from them.



    Thanks,

    Stan

    Thanks,

    Stan Stone
    Lexington, NC (High Rock Lake)

    https://youtube.com/c/StanStoneFishing

  5. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,083
    #5

    Re: 08 225 Etec HO Problem (StanS)

    Every thing I hear about Fritts is good. You're in good hands.

Similar Threads

  1. Problem With My 115 Etec
    By somerdink in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 04-26-2011, 08:05 AM
  2. etec problem
    By gillcracker in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 03-23-2010, 02:32 AM
  3. Problem with Etec 225 HO?
    By mlsmith in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-25-2007, 08:22 PM
  4. Etec problem
    By Tom B in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 11-02-2005, 09:17 AM
  5. rusty-further etec problem
    By hawghawler0 in forum Evinrude/Johnson Motors
    Replies: 20
    Last Post: 06-26-2005, 07:15 PM