Was heading back to ramp today & went to trim down & it woludn't. Will however trim up from engine or helm either one. When trying to trim from helm or engine either one you can hear & feel a relay clicking(the bottom one) which I assume is the trim down relay. How can I check this relay with a volt meter & what to expect ??? Thanks
2003 Stratos 18XL 2019 Mercury pro xs 150 4 stroke. Model # 1152F131D. Serial # 2B649764
swap the relays and see if the opposite occurs. If so, one relay is bad but replace both
-----
A Technical troubleshooter possessing more tools than talent !
Happened to me in the spring. Yep swap the relays; then you should have up but not down. Replace both of them, keep the good one as a spare if it were to happen again.
1993 Champion 190
1991 Evinrude Intruder 150
Thanks guys, luckily it was a wire on back of the block that the relays plug into.
2003 Stratos 18XL 2019 Mercury pro xs 150 4 stroke. Model # 1152F131D. Serial # 2B649764
Reply With Quote