Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2008
    Location
    Winter Haven
    Posts
    323

    Lower unit stuck

    any trick to getting a stuck lower unit off Trying to change impeller but just seems to be stuck
    Shift rod is disconnected ( took powerhead off < replacing) 2 bolts under cavitation plate is off 4 bolts are off just cant get the unit off.

    This is on a 1989 110 Johnson.
    Sprayed with PB blaster around the unit going to try again tomorrow.

  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2

    Re: Lower unit stuck (bbatton)

    Florida Saltwater......Explosives?

    If the power head is off its not the drive shaft stuck in the crank, try gently tapping on the gear case sides with a soft face mallet.

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,119
    #3

    Re: Lower unit stuck (ELGIN)

    And a blow torch.

Similar Threads

  1. Lower unit stuck on 1990 Johnson 100
    By deaconsfan in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 03-21-2012, 01:12 PM
  2. Lower unit rebuilds? 2000 Mercury 225 Optimax 3.0 lower unit
    By Roger Matthews in forum Missouri Fishing
    Replies: 0
    Last Post: 01-16-2012, 02:51 PM
  3. Mercury 250 Optimax with the torque master lower unit (gray lower unit)
    By Wheeler Lake in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 03-28-2010, 06:11 AM
  4. Metal in lower unit oil/swap to HPDI lower unit
    By hooken203 in forum Yamaha Motors - High Performance
    Replies: 5
    Last Post: 10-09-2009, 02:35 PM
  5. stuck lower unit
    By basshole in forum Yamaha Motors
    Replies: 2
    Last Post: 04-22-2006, 04:27 PM