Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Apr 2009
    Location
    Marion
    Posts
    9

    2002 225 ho Fitch Revs to the moon

    After running, Trailering the boat, shift to Neut. and the motor revs up. try to bump the hot foot and it revs higher sticks then comes back down.
    I have checked to make sure the HF is ok, Checked ,adjusted the linkage and lubed, not sticking there. Carb butterflies dont apear to be sticking.
    Any ideas here would be great. Carb floats sticking? Some sort of electronic rev/choke switch? Thanks ahead of time!

  2. #2

    Re: 2002 225 ho Fitch Revs to the moon (reelinron)

    Maybe a bad spring on the hotfoot?

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,116
    #3

    Re: 2002 225 ho Fitch Revs to the moon (bassingaround)

    No carbs on an injected motor could be a bad TPS (throttle position sensor).

  4. Member
    Join Date
    Feb 2009
    Location
    englewood
    Posts
    9
    #4

    Re: 2002 225 ho Fitch Revs to the moon (ChampioNman)

    i have a 2001 ho rude same thing happened to me (tps) was bad put new one on runs great now.

  5. Member
    Join Date
    Apr 2009
    Location
    Marion
    Posts
    9
    #5

    Re: 2002 225 ho Fitch Revs to the moon (bassfishin)

    TPS Ill try it on monday and update on result.. Thanks guys

Similar Threads

  1. Good or bad 2002 225ho fitch?
    By astasoftride in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 10-03-2011, 10:29 AM
  2. 2002 Evinrude Fitch motor?
    By Dawnpatrol in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 12-07-2009, 03:38 PM
  3. 2002 175 Fitch
    By jdillehay in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 03-27-2008, 12:30 PM
  4. 200H.O Top end revs
    By bassfanatic5 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 10-03-2007, 01:05 AM
  5. WOT - max revs and not max power revs !!!!
    By nicknick in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-06-2006, 07:50 PM