http://i45.photobucket.com/albums/f5...wb307rsas9.jpg
Printable View
Were did you get that pic Lou? http://www.bassboatcentral.com/smileys/roll.gif
Borrowed it from you Bud http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif Just trying to help all http://www.bassboatcentral.com/boardstuff2/beers.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
I agree!
just had to gig ya a little!!! http://www.bassboatcentral.com/smileys/Laugh.gif
I haven't been on the boards for a while - I see a different boat - I thought you had your eye on a new 21XRD - Do you like the new ride? - Fred
Fred, had my eye on several boats but went with the Stroker for several reasons!! I like her more each time I take her out.. ANd that has only been twice so far. http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif Louis
Hey Lou!! Long time no speak lol. Can you give me some details about how the 20xd was loaded when these tests were conducted??? Thanks, Shayne http://www.bassboatcentral.com/boardstuff2/beers.gif
Actually that test was on a 20XDC, not an XD. The test was done with two people, three batteries, a motor guide troller, the livewells empty, and a full tank of gas(about 30 gallons). The boat had a 12 inch Rapid Jack., 1.62 Sportmaster lower unit, and was run around 1 1/2 to 1 3/4 inches above the pad. That is the information that I have read about the test, some of it may be off a little, you know how the net can be.
Thanks Spec!! What prop are you running for fishing?? Dont you have the same setup? Thanks alot.... Shayne
My set-up is quite different. I have a 10 inch Detweiler Hydraulic plate and a Minn Kota Pro 80 Troller (Very Heavy). I run a 28 Bravo 1 with one inch vent holes to fish with. It will consistently run 88-90 loaded to fish with two people and has a great hole shot. I have ran a 30 Bravo 1 that had one and a quarter inch vent holes and the holeshot was almost the same but it ran about 3 miles an hour faster. I just haven't tried to find me one to buy as I have been very happy with the 28 Bravo so far.
Hey Louis I realize this is an old thread but I just repowered to a 250xs on my 20DC and am interested. Where can I view this test I see its gone from the first post now
Thanks
Charlie B
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bullet20dc »</TD></TR><TR><TD CLASS="quote">Hey Louis I realize this is an old thread but I just repowered to a 250xs on my 20DC and am interested. Where can I view this test I see its gone from the first post now
Thanks
Charlie B</TD></TR></TABLE> Here you go Charlie!!! http://www.bassboatcentral.com/boardstuff2/beers.gif
http://www.bwbmag.com/output.cfm?ID=1221571
Thanks Darryl good read
You're welcome, Charlie...
Thankd Darryl, I was outa town since Friday morning.. I do need to put this back up http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
No problem, Lou... http://www.bassboatcentral.com/boardstuff2/beers.gif
I just bought a new 21xrd w/ performance prop - there aren't any markings, mfg, or pitch - how can I tell if it IS a performance prop and size?
Take the nut and washer off and look there on the top of the prop hub, it will say performer and pitch.. http://www.bassboatcentral.com/smileys/smile.gif
Lou,
Top of hub - EOT-14327-RU and (10) on separate stamp - no other markings - I'm puzzled???
?? How about a picture?? You can email it to me if ya want.. Largemouthlou@aol.com
Looks like it is a 14+ diameter and a 27 pitch
I'll get a picture this weekend - BTW it's a 4 blade, through hub, large shaft exhaust
6000 / 80.9 mph 1'' below pad - front end heavy
Do you know what lower unit was used in the test ??
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egammon »</TD></TR><TR><TD CLASS="quote">Do you know what lower unit was used in the test ??</TD></TR></TABLE>
Sportmaster with 1.62 gears
Where could I find a Prop Test for a 225 promax or 280 at?
HMMMMM, I haven't seeen any to post.... May have to try a google search and see what comes up http://www.bassboatcentral.com/smileys/smile.gif
seems that propping it too 5900rpm is the fastest maybe best powerband for this engine
al other props rev the engine up higher
Thank you Sir!!!
http://www.bassboatcentral.com/smileys/thumbsup2.gif
running a 20xf with a new 250xs with sportmaster gearcase and 1:75 gears. Put 28 bravo 1on boat. what numbers should I expect with this rig? still breaking this motor in with only hours on it. does anyone else have suggestions on another setup?
You are going to be into the limiter somewhere between 83-86 with the 28 Bravo. There are a few on here that run a 250 with 1.75 gears hopefully they will chime in.