Printable View
Well my first new paint wasnt that great but it was fun.
This is my work area
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://im1.shutterfly.com/media/47a1...D550/ry%3D400/
http://www.bassboatcentral.com/smileys/Laugh.gif http://www.bassboatcentral.com/smileys/Laugh.gif
Dont be so hard on yourself... They look fine. Better than most first batchs. http://www.bassboatcentral.com/smileys/thumbsup2.gif
I like the one on the right. http://www.bassboatcentral.com/smileys/smile.gif
Looks real good! http://www.bassboatcentral.com/smileys/thumbsup2.gif
Just start using stencils for the gills and such.
Mike see how the black dot is not a solid dot... it seemed to run out when I sprayed it. I think the coat before that was to wet http://www.bassboatcentral.com/smileys/ohwell.gif
They have some good tips here...
http://www.bbcboards.net/zerothread?id=498503
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishin fever »</td></tr><tr><td class="quote">Mike see how the black dot is not a solid dot... it seemed to run out when I sprayed it. I think the coat before that was to wet http://www.bassboatcentral.com/smileys/ohwell.gif </td></tr></table>
Nope, dot paint too thin, too much pressure, too close to the bait. One or all of these is the running issue. http://www.bassboatcentral.com/smileys/wink.gif Try using a hole punch on a stencil.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishin fever »</td></tr><tr><td class="quote">Mike see how the black dot is not a solid dot... it seemed to run out when I sprayed it. I think the coat before that was to wet http://www.bassboatcentral.com/smileys/ohwell.gif </td></tr></table>
Im no pro, but...
We use different things like finish nails or un-sharpened pencils to make our dots. Just dip the end in the paint a little and dab it on the lure this way you dont have to change colors in the air brush too.
Donny, buy you one of these the next time you are in hobby lobby....
http://www.rapidonline.com/netalogue...M061261W01.jpg
Pick out whatever circles you will use and take scissors and cut the rest off. Put some masking tape over the sides to prevent overspray.
As Mike said, turn your air pressure down some.
A good rule of thumb for me is:
opaques @ 40lbs pressure
pearls @30-35lbs pressure
transparents @ 25lbs pressure
Now you can vary this a little bit depend on what shoots best for you of course.
Those look nice for your 1st two baits without any stencils!!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishin fever »</td></tr><tr><td class="quote"> see how the black dot is not a solid dot... it seemed to run out when I sprayed it. I think the coat before that was to wet http://www.bassboatcentral.com/smileys/ohwell.gif </td></tr></table>
Add a piece of cardboard hung up to spray your 1st switch of paint colors on after washing out your gun. Spraying on the cardboard will push out the remaining water that was left in the gun. Just a guess!! Good luck with your painting!!
Not bad at all Donny. You're off to a good start for sure. Your work station looks good too. http://www.bassboatcentral.com/smileys/thumbsup2.gif
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishin fever »</td></tr><tr><td class="quote">Mike see how the black dot is not a solid dot... it seemed to run out when I sprayed it. I think the coat before that was to wet http://www.bassboatcentral.com/smileys/ohwell.gif </td></tr></table>
Are you heat setting each coat with a heat gun or blow dryer? Like Mike said, you may have had your paint too thin or your gun too close when you sprayed the dot.
not bad for first time... http://www.bassboatcentral.com/smileys/thumbsup2.gif
Looks great . http://www.bassboatcentral.com/smileys/thumbsup2.gif
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by eojmama »</td></tr><tr><td class="quote">
... We use different things like finish nails or un-sharpened pencils to make our dots. Just dip the end in the paint a little and dab it on the lure this way you dont have to change colors in the air brush too. </td></tr></table>
+1 http://www.bassboatcentral.com/smileys/thumbsup2.gif
Not bad,just keep practicing. you'll get it. http://www.bassboatcentral.com/smileys/thumbsup2.gif
All you need is to put up a picture of your family. This way you'll recognize them when they come to bring you your dinners! Nice job!
Hang in there don't give up I am now to painting to http://www.bassboatcentral.com/smileys/thumbsup2.gif http://www.bassboatcentral.com/smileys/thumbsup2.gif http://www.bassboatcentral.com/smileys/thumbsup2.gif http://www.bassboatcentral.com/smileys/thumbsup2.gif http://www.bassboatcentral.com/smileys/USA1.gif
keep up the good work
Practice making dots on a paper before shooting your lure. Same with your lines. You will get the hang of it. Let your coat dry before hitting it again. I use a space heater to speed things up.