Auto Chart, Auto Chart Pro & Auto Chart Live Information Resource

Printable View

Show 40 post(s) from this thread on one page

02-28-2016, 11:10 PM
Doug Vahrenberg

Quote:

Originally Posted by Pathornton

Tried making my first live auto chart today with helix 10di. Depthfinder was reading between 6 and 10 feet but map was made in ranges of 10' to 30'. Depth offset was at zero. Had to set it to -16 to get right in the depth i was in at that time but the variations were still wayyyy off. Any ideas?

Do you have a screen shot? Not visualizing what you are talking about
02-29-2016, 10:16 PM
Pathornton

Quote:

Originally Posted by Doug Vahrenberg

Do you have a screen shot? Not visualizing what you are talking about

I think i got it straightened out. Only thing i can figure is that the side imaging transducer on my other unit was interfering with the 2d on the helix. ( mounted on opposite sides of transom). Tried again yesterday with si unit off and had no problems in water deeper than 2 feet. Had some problems shallow as it showed deep holes where theyre werent any but thats not a huge deal. Other than that the auto chart live is a very cool feature. Im afraid its gonna cut into my fishing time a little bit for a while. Lol
03-11-2016, 05:39 PM
00 mod

Quote:

Originally Posted by Darkhorse

Sorry Bud

1 Create a folder for each Zero line card (I have a few)on your pc
2 Create a common folder that you will copy all the information to .
3 Copy all Ac Data from each card to each folder allocated to the respective card (each card has one folder that you copy to dont mix and cross copy)
4 Once you have copied all the card information to each folder you then copy the entire folder to The common folder Ac Data and copy and replace . ( so you have all the AC Data folders in one folder.
5 Insert any Zeroline card and copy all the data into the AC Data folder of ZLC from the common folder ACdata file.
6 Insert ZLC into Humminbird Onix and zoom into area that you know has AClive data and it should work.

Is that more clear.
I have 3 ZLC and just copied all info to all of them and they all have the same info. I have even shared info with friends.

Has anyone tested this to see if it works? I have a thread here: http://www.bbcboards.net/showthread.php?t=692948 Asking about this. I have used my entire 8 hrs on one of my Helix 9 units(I have 2). I bought 2 ZLC so that I could get that data on both cards. Humminbird says not possible. I want to try this, but not take a chance at ruining my entire map....

Jeff
03-11-2016, 06:45 PM
fishfood

Quote:

Originally Posted by 00 mod

Has anyone tested this to see if it works? I have a thread here: http://www.bbcboards.net/showthread.php?t=692948 Asking about this. I have used my entire 8 hrs on one of my Helix 9 units(I have 2). I bought 2 ZLC so that I could get that data on both cards. Humminbird says not possible. I want to try this, but not take a chance at ruining my entire map....

Jeff

But you are hoping someone else took that chance?? Sometimes you just have to jump in the deep end and see if you can swim.......... Now get yourself in there!!! :laugh:
03-11-2016, 07:14 PM
Bob B

Quote:

Originally Posted by fishfood

But you are hoping someone else took that chance?? Sometimes you just have to jump in the deep end and see if you can swim.......... Now get yourself in there!!! :laugh:

.....and let us know if it works:wink:
03-11-2016, 08:51 PM
fishfood

Quote:

Originally Posted by Bob B

.....and let us know if it works:wink:

:thumb up2:
03-11-2016, 09:45 PM
sfw1960

SPEAKING of .....

Quote:

Originally Posted by fishfood

But you are hoping someone else took that chance?? Sometimes you just have to jump in the deep end and see if you can swim.......... Now get yourself in there!!! :laugh:

How's the new ONIX software workin' over at "Jimmy's Chicken Shack"????

http://doubtfulnewscom.c.presscdn.co...01/chicken.jpg

:laugh: :roll: :laugh: :roll: :laugh: :roll: :laugh: :roll:
03-12-2016, 08:28 AM
fishfood

Quote:

Originally Posted by sfw1960

How's the new ONIX software workin' over at "Jimmy's Chicken Shack"????

:laugh: :roll: :laugh: :roll: :laugh: :roll: :laugh: :roll:

Pretty good so far. A customer that I installed for last week had a strange chart glitch but we haven't been able to recreate it. We've decided it may have been a corrupt waypoint.

It's much faster than previous versions of the software and the Chirp makes a difference in the 2d for the better. No I still wouldn't pay $$$$ for a transducer or make that my overriding decision in buying a unit but the 2d is nice and clean so I'm running it.

My biggest issue so far are the things still missing from the software. We didn't get the palettes, waypoint management still looks basically nonexistent and no option to adjust screen size. These things, to me should be basic features since they are in both core and Helix models.

Like others that run them I would have a tough time going back.
03-12-2016, 03:11 PM
Bob B

James have you noticed any issues with fuzzy SI that a couple people have talked about?
03-12-2016, 06:49 PM
fishfood

Quote:

Originally Posted by Bob B

James have you noticed any issues with fuzzy SI that a couple people have talked about?

I haven't Bob but I am still haven't had a lot of seat time with it.
03-15-2016, 03:21 PM
JerryC

Autocharts pro comes with the zero lines card right? Or do I need to purchase the separate zero lines card?
03-15-2016, 03:49 PM
jimmybass2

Also would like to know the following... Onix shares maps across the network (fact), does the Onix network share info on 1 ZLC across the network?
03-15-2016, 10:59 PM
eyedrvm

I would be ok with autochart live if I can put an sd card in the other slot with a zero line card in the first slot. That way can record logs on the sd and buy autochart or pro later if anything would happen to my zero line card. Is that possible?
03-17-2016, 10:32 PM
Doug Vahrenberg

Quote:

Originally Posted by JerryC

Autocharts pro comes with the zero lines card right? Or do I need to purchase the separate zero lines card?

Yes it comes with Zero Line Card either version AutoChart or AutoChart Pro
03-18-2016, 09:27 AM
eyedrvm

Called humminbird and they said that you cannot have an sd card in the second slot and record to both the zero line in slot one and an sd card in slot two.
03-18-2016, 06:49 PM
Bob B

Quote:

Originally Posted by eyedrvm

Called humminbird and they said that you cannot have an sd card in the second slot and record to both the zero line in slot one and an sd card in slot two.

You are probably just going to have to try it ....... You may have to map with Autochart Live to internal memory and move it to the ZLC later. I have seen it posted that someone recorded the sonar data at the same time as using Autochart Live....but maybe they were going internal with the Autochart Live.
03-18-2016, 11:35 PM
Kenny418

So, I have a question for you guys and I don't think it has been asked. I tried to read this whole thread from start to finish in hopes of finding a answer. I just purchased a new laptop. My old one had a DVD/ cd rom. My new one does not. I've had Auto chart pro since it's release. Is there anyway to transfer the program from lap top to lap top or do I need to guy buy a external rom to plug in and load the cd on to the new one. Also I'm trying to remember if there was an activation code or something on the packaging the program came in. I don't think I have that packaging. I did find my auto chart cd though. Any help is greatly appreciated.
Thanks
Kenny
03-19-2016, 05:39 PM
Capw

Quote:

Originally Posted by Kenny418

So, I have a question for you guys and I don't think it has been asked. I tried to read this whole thread from start to finish in hopes of finding a answer. I just purchased a new laptop. My old one had a DVD/ cd rom. My new one does not. I've had Auto chart pro since it's release. Is there anyway to transfer the program from lap top to lap top or do I need to guy buy a external rom to plug in and load the cd on to the new one. Also I'm trying to remember if there was an activation code or something on the packaging the program came in. I don't think I have that packaging. I did find my auto chart cd though. Any help is greatly appreciated.
Thanks
Kenny

Thumb drive maybe?
03-19-2016, 05:48 PM
Kenny418

Quote:

Originally Posted by Capw

Thumb drive maybe?

I was able to go to walley world and buy an external cd drive for $20. Auto chart pro is now loaded on to new lap top but I can't find my activation code from 2 years ago ��. Trying to locate that on old computer right now
03-20-2016, 06:05 AM
bobcoy

Try this link...............http://www.humminbird.com/Category/S...ctivationCode/

Show 40 post(s) from this thread on one page