My rooster tail is only about foot high at WOT. 2001 Champion 193 DC 2001 Johnson 200 68.2 GPS 5950 RPMS> Should my rooster be higher to the top of the cowling? My prop shaft is 3.5 inches below pad. Im running a 24 Raker.
Printable View
My rooster tail is only about foot high at WOT. 2001 Champion 193 DC 2001 Johnson 200 68.2 GPS 5950 RPMS> Should my rooster be higher to the top of the cowling? My prop shaft is 3.5 inches below pad. Im running a 24 Raker.
Even with the top of cowling or LOWER! Low and Long is good!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blue198 »</TD></TR><TR><TD CLASS="quote">Even with the top of cowling or LOWER! Low and Long is good!</TD></TR></TABLE>
Agree...long and low is best!!!!!! Your figures sound really good!!!!
Thank you all for the help. Like I said i am dialed in as good as I can. I will be at the AZ boat show in phx on the 24th Saturday for Champion. I also heard my rep from Champion was laid off with a bunch others. I am worried for Genmar. I am pushing some deals Saturday. I will post some pics later on if i can.
Actually it is about 3 ft high but isnt to the top of the cowling. It is high when i first get going but then the bow kicks up and it lowers. I dont think that I need it any higher.
Sounds like your just hokked up to me. Speeed and all look pretty good.
you running the same speed?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vegasbasspro1975 »</TD></TR><TR><TD CLASS="quote">you running the same speed?</TD></TR></TABLE>
Me? No. http://www.bassboatcentral.com/smileys/smile.gif
Im sure I would be over 70 if i lived at bout sea level. i am 2400 feet here.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vegasbasspro1975 »</TD></TR><TR><TD CLASS="quote">Im sure I would be over 70 if i lived at bout sea level. i am 2400 feet here.</TD></TR></TABLE>
That really thins the air. I'm at 355' about sea level.