Rusty, cannot get the starbord side to index. Are there some tricks that I am not aware of? Have tried all plugs on that side. Also what should be the torque? Tom http://www.bassboatcentral.com/smileys/glasses.gif
Printable View
Rusty, cannot get the starbord side to index. Are there some tricks that I am not aware of? Have tried all plugs on that side. Also what should be the torque? Tom http://www.bassboatcentral.com/smileys/glasses.gif
If a plug won't index try it on the port side usually works then. Torque is 22 lbs
Have trtied all plugs on that side. http://www.bassboatcentral.com/smileys/glasses.gif
If they wont work in the port side, you need to get three more plugs......Sorry.
Thanks. Made sure the parts house ordered 2 sets. I don't see how this motor ran like it did. The gap on some of the old plugs was around .055 they were so burned. This should help with starting and ideling. Thanks again Tom http://www.bassboatcentral.com/smileys/glasses.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
Glad to help.
index washers?????????????
No way on the washers. Not recommended.
NO!!!!!!!!!!!!
If the plugs you have ( This is on Direct Injection Motors) will not index on either bank of cylinders, buy more plugs.
Dumb question but why not the washers?
The depth, the plug needs to be in the cylinder.