Currently have 6 Denso W24FS-U in the motor. I need to change them out. Could someone recommend the plug and the gap?
Thanks.
Phil
Printable View
Currently have 6 Denso W24FS-U in the motor. I need to change them out. Could someone recommend the plug and the gap?
Thanks.
Phil
NGK BR8HS-10 I would go to the NGK site and put in your model # to be sure. You can also call the dealer.
This info is also on a sticker under the cowl. The stick her the plug number as well as gap info.
Thanks . .I didnt see anyting under the cowling . .but I will go look again!
sparkplugs.com is the best place for plugs
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reata210 »</TD></TR><TR><TD CLASS="quote">NGK BR8HS-10 I would go to the NGK site and put in your model # to be sure. You can also call the dealer.
This info is also on a sticker under the cowl. The stick her the plug number as well as gap info.
</TD></TR></TABLE>
That should be the one, my 1991 manual calls for em.
thanks for the info . .you wouldn't want to sell a xerox copy of your manual by chance? mine is a 90 but it should be close enough and give me "something".
ngk b8hs-10 gap is 1.0 mm or 0.004in http://xs-s.com/zf/images/smile/emthup.gif
0.004??? http://www.bassboatcentral.com/smileys/eek.gif
The "10" means that they are factory-gapped at 1mm (or about 0.037). No need to gap a "10".