Thinking about trying a TPX OT4 or a Performance IV Bullet cut on a 21 footer
300x with 1:62 gear. Any suggestions on pitch or another brand prop?
Printable View
Thinking about trying a TPX OT4 or a Performance IV Bullet cut on a 21 footer
300x with 1:62 gear. Any suggestions on pitch or another brand prop?
Both the TXP and Performer props are top notch....Dont over look the bravos....I think its all gonna depend on what you want the prop to do???...Fishing or playing????
Welcome to the boards Bill!!!! http://www.bassboatcentral.com/boardstuff2/beers.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1outlaw »</TD></TR><TR><TD CLASS="quote">Both the TXP and Performer props are top notch....Dont over look the bravos....I think its all gonna depend on what you want the prop to do???...Fishing or playing????
Welcome to the boards Bill!!!! http://www.bassboatcentral.com/boardstuff2/beers.gif </TD></TR></TABLE>
I think that that is going to be what most people will say, and I will through in a prop I like
Mercury pro et
I'm thinking a 28 for fishing and a 32 for running.
28 Bravo for fishing
30 Merc Pro-ET for top end running light.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hydrilla »</TD></TR><TR><TD CLASS="quote">28 Bravo for fishing
30 Merc Pro-ET for top end running light.
</TD></TR></TABLE>
Hmmm that's strange because you told me that I should get a 30p bravo I and have mark set it up. So now is the 28p a better prop and the 30 Pro et or the 30p bravo I. http://www.bassboatcentral.com/smileys/popcorn.gif
T.L. You have a 300XS 6400 limiter = 30 Bravo
R.X. has a 300X 6900 limiter = 28+ Bravo
http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
Thank you for the clarification. I am still learning and have allot of learning to do. http://www.bassboatcentral.com/boardstuff2/beers.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EvilBullet »</TD></TR><TR><TD CLASS="quote">Thank you for the clarification. I am still learning and have allot of learning to do. http://www.bassboatcentral.com/boardstuff2/beers.gif </TD></TR></TABLE>
We are all in the same boat!!! ALWAYS LEARNING!! http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
Hopefully we can help each other out and save a little $. Lou I was gonna rag on you and your large collection of wheels http://www.bassboatcentral.com/smileys/Laugh.gif but i'm just as embarrassed of the piles I have as well. http://www.bassboatcentral.com/smileys/roll.gif
I've been cutting back also. Getting the new fatshaft sporty lower helped me do it. Yes, piles. http://www.bassboatcentral.com/smileys/sick.gif
http://www.bassboatcentral.com/smileys/Laugh.gif http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/Laugh.gif Heck I will have to start a new pile when the CC is done http://www.bassboatcentral.com/smileys/doh.gif http://www.bassboatcentral.com/smileys/Laugh.gif http://www.bassboatcentral.com/boardstuff2/beers.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Largemouthlou »</TD></TR><TR><TD CLASS="quote">T.L. You have a 300XS 6400 limiter = 30 Bravo
R.X. has a 300X 6900 limiter = 28+ Bravo
http://www.bassboatcentral.com/smileys/smile.gif http://www.bassboatcentral.com/boardstuff2/beers.gif </TD></TR></TABLE>
http://www.bassboatcentral.com/smileys/wink.gif
Thanks for the info guys your saving me a lot of money and leg work. You got me on the right track several years ago but now im needing to update a few things.
Does the Bravo I have to be drilled? If so where and how big? Thanks.
Yes, If it dose not have ventilation holes drilled into the barral then yes it needs to be drilled. Did you buy it new or used? Do you see any holes drilled into the barral of the prop. Usually 2 holes in between each ear found at the base of the hub. Can't miss them. Maybe someone can post a picture. i don't have one handy.
Here is what Rich is talking about, I had mine drilled 1.25" exhaust and PVS holes, I haven't ran it yet to see how it does,but from what I been told this should be a good set up. I'm running mine on a 20xd/300x 1.62 gears
http://i68.photobucket.com/albums/i3...1/100_0864.jpg