Printable View
1) What is the "process" to display Hrs screen ?
Per manual is should appear automatically just toggle to that display.
Did I miss something (Operator Error ??)
2) What is normal operating temp for 06 225 Pro XS ?
3) I would like to order a Mercury Manual for an 06 225 Pro XS.
What are the costs ? http://www.bassboatcentral.com/boardstuff2/beers.gif http://www.bassboatcentral.com/smileys/smile.gif
Modified by Bollee at 5:04 PM 3/5/2009
Engine hours is not one of the functions you can toggle to when the system monitor is operating. Engine hours will be displayed briefly every time the system is powered up, right after the software version is shown. So, when you turn your ignition key on and hear the beep, watch the monitor. Immediately after your software version is displayed, your engine hours will be shown.
If you have the Smartcraft Tach, then you can toggle to the engine hours, but if you have the monitor only then the above answer is correct. http://xs-s.com/zf/images/smile/emthup.gif
For the System Monitor:
One more note... You've got to make sure "hours" or "engine hours" is set to a value of "1" or "on" in your calibration setup. If it was inadvertantly turned off during calibration... you won't see it. http://www.bassboatcentral.com/smileys/wink.gif
I'll drop you an IM on the manual. http://www.bassboatcentral.com/smileys/wink.gif
Don beat me to the post and with more detail! http://www.bassboatcentral.com/smileys/smile.gif
On my smart craft monitor you can get to a screen that displays engine hours.
You have to have it selected in one of the setup menus.
JAZII