I have a 1986 Mercury 150. Replaced starter, solenoid, and battery. When I turn the key I still get only a click. All cables seem to be ok. I get 12v from ignition to the solenoid. Any ideas of what to check next.
Printable View
I have a 1986 Mercury 150. Replaced starter, solenoid, and battery. When I turn the key I still get only a click. All cables seem to be ok. I get 12v from ignition to the solenoid. Any ideas of what to check next.
If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info when posting. Thanks! :beers:
Monitor voltage on each side of the Starter Solenoid (one side at a time) while attempting to start the engine. Either you have a bad component you installed, OR you have a cable/connector/wiring problem.