Standard live well system to Pump out system

[cdubu]

Has any done or had their standard livewell system changed to a pump out system? How expensive or difficult?

[CStewart]

Very easy to do actually. Depending on your setup you may have to add a pump for recirc and pump out and change out the spraw nozzle to a valve nozzle

http://Www.flow-rite.com

They have all the factory parts that skeeter uses and diagrams to help you design and layout your system

[cdubu]

Thank-you CStewart

[fishin couillon]

I added the pump out system to my SX190 this past summer. Fairly easy to do. Hard part was taking everything out the back. A little down the post i have another pic showing the parts that i used. I'd imagine it would be about the same for yours but just double check with the website. All parts were ordered direct from Flow Rite and hassle free with quick shipping. If i'm remember correctly it cost about $50 for the parts and i bought the hose locally for about $30. Here is the link to my pics i took and posted. http://www.bbcboards.net/zerothread?id=537502

[VinceJE]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by CStewart &raquo;</td></tr><tr><td class="quote">Very easy to do actually. Depending on your setup you may have to add a pump for recirc and pump out and change out the spraw nozzle to a valve nozzle

http://Www.flow-rite.com

They have all the factory parts that skeeter uses and diagrams to help you design and layout your system</td></tr></table>


I just finished my install of this kit. Works great. Just keep in mind you need to add a new/additional thru-hull fitting.