Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Apr 2017
    Location
    Colleyville, TX
    Posts
    575

    Finished install of Helix on Tracker pt 190 TX

    I have been slowly adding my accessories to my new Tracker 190 TX. Over the weekend I finished my Helix 12si install. It came out nice. Still tweaking the transducer install hoping to get by without having to add a separate 2D skimmer for depth reading at speed. The really nice thing about this install is the unit can be easily turned to face stern or bow. I am close on the transducer. I was getting very clear SI/DI readings past 8mph and got decent reading on plane at 30mph. Began to loose bottom reading intermittently above 35mph.

    Attached Images Attached Images

  2. Member 09PT190TX's Avatar
    Join Date
    Sep 2014
    Location
    McKenzie, TN
    Posts
    1,157
    #2
    Nice clean install. I used the same mount on mine.

  3. Member
    Join Date
    Oct 2013
    Location
    Atlanta, GA
    Posts
    304
    #3
    Wow that looks big! Looks bigger than your whole dashboard but hey it's not going to stop me from getting one too.

  4. Member
    Join Date
    Apr 2017
    Location
    Colleyville, TX
    Posts
    575
    #4
    It does look big but for 66 year old eyes its much easier to read than the HB999 I replaced.

  5. Member
    Join Date
    Mar 2014
    Location
    North Central Texas
    Posts
    259
    #5
    Please, what mount is that?

  6. Member
    Join Date
    Mar 2017
    Location
    Blanchester Ohio
    Posts
    416
    #6
    Looks like a ram swing arm mount

  7. Member
    Join Date
    Jun 2012
    Location
    Valparaiso, IN
    Posts
    7,091
    #7
    That is the same RAM mount I used for both of the 12s I have. I'm happy so far with it and I love the swing arm feature. Good job on the install!

    2005 Champion 198 DC Elite
    2005 Mercury Optimax-225hp (Serial#1B073011)

  8. Member
    Join Date
    Apr 2017
    Location
    Colleyville, TX
    Posts
    575
    #8
    Here is a link to the Ram Mount site showing this mount. They make a number of 'swing arm' units but this is the one you probably want. http://www.rammount.com/part/RAM-109HU

  9. Member BuzzBait53's Avatar
    Join Date
    Jun 2011
    Location
    Huntsville Tx
    Posts
    929
    #9
    Looks great and the home made spacer is a nice touch.

  10. Member
    Join Date
    Aug 2015
    Location
    Holcomb MS
    Posts
    83
    #10
    I love my ram swing arm as well. Rock solid.

  11. Member
    Join Date
    Apr 2021
    Location
    Arizona
    Posts
    157
    #11
    I have a 2021 Tracker 190 TXW with a stock Lowrance Hook Reveal 5". It uses a VESA 75 hole pattern. I am replacing it with a Helix 9 SI G4N. I did not want to drill new holes. I'm planning on using two of the Ram VESA 75 D size ball mount. One on top and one as a backer plate underneath. Then a short or medium extention to the Helix mount. I also custom ordered a spacer to mount underneath the VESA 75 mount for the wires so as to have a clean look. I'll post finished pictures of the install next month.

    What do you guys think of this plan?

    Mounting_Holes.jpegRAM-D-2461U_1_1440x.jpegRAM-D-202U-25_1_1440x.jpegRAM-D-201U_1_1440x.jpegSpacer.jpg
    2021 Tracker 190TXW
    Mercury 115 PRO XS
    Ultrex 80lb 52” iPilot Link
    Bow Mount Humminbird Helix 10
    Cockpit Mount Humminbird Helix 9
    Mega 360
    Mega Live Target Lock