And here I went from no middle seat to a middle seat. Feel better if my boy was directly beside me while on plane.
And here I went from no middle seat to a middle seat. Feel better if my boy was directly beside me while on plane.
looks good and great idea about having the little one right next to you.
Looks great.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
http://i54.tinypic.com/venoz4.gif http://www.bbcboards.net/image.php?t...ine=1451154028
2009 H51, 2015 BassCat Sabre, 2001 X18 project
Thanks! Later on I thought that I should left it smooth without the grooves and gotten a carpet graphic from iguana to stick on it with the tracker logo or something. Who knows maybe someday I will anyway.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Im gonna get started on this to. Good work guys.
2006 Ranger Z20
2011 225hp Evinrude ETEC H.O.
26p Raker II SS prop
HDS9 gen2 at bow and HDS16 carbon on a precision sonar console bracket.
Units linked into outboard interface.
Precision sonar gauge relocation kit.
2) 8' power pole blades
101 lb 36v minn kota fortrex
Bob's 10" hydraulic jack plate
I think BassCat sells them, but are pretty Pricey
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
I'm gonna use aluminum diamond plate and put plastic mold on the edges to fill out nicely and just cover the area. See if I can get carpet embroidery of something to place in front of the live well area.
2006 Ranger Z20
2011 225hp Evinrude ETEC H.O.
26p Raker II SS prop
HDS9 gen2 at bow and HDS16 carbon on a precision sonar console bracket.
Units linked into outboard interface.
Precision sonar gauge relocation kit.
2) 8' power pole blades
101 lb 36v minn kota fortrex
Bob's 10" hydraulic jack plate
Sounds like a good plan. Diamond plate would be a good non slip surface.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Those things are handy. I rarely use the seat either but my dad does on the back deck but even if Im alone its always there. Actually they are powder coated steel clips. I took my seat post to my local fab shop and he ordered them for me. Have no idea where he got them tho but he had them for me the next day. Fastenal or a similar store would probly have something.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
great idea!! i currently just have my seat removed (put 3/4" marine ply with carpet over the top for more support)
but LOVE the idea of diamond plate... not sure about yours but when i removed my middle seat, it seemed fairly un-supported, like the aluminum would bend over time.. that is why i added the ply on top...
but i would recommend adding some aluminum angle stock and rivit it to the underside of the seat before installing the diamond plate
just a thought...
*BRIAN CASKEY*
'00 Tracker ProTeam 185 Special Edition
'99 75 hp Merc ELPTO (ser. 0G837626)
Minn Kota Terrova 80 w/Ipilot
Helix 10 Sonar/GPS / bow 360 / RC-1
Helix 7 CHIRP MSI GPS G3
STRICTLY Shimano and St. Croix!!!!
question though... think the diamond plate will get hot in the sun???
*BRIAN CASKEY*
'00 Tracker ProTeam 185 Special Edition
'99 75 hp Merc ELPTO (ser. 0G837626)
Minn Kota Terrova 80 w/Ipilot
Helix 10 Sonar/GPS / bow 360 / RC-1
Helix 7 CHIRP MSI GPS G3
STRICTLY Shimano and St. Croix!!!!
I made a tool tray/tackle cubby to replace my Tracker's center seat... 3/4" treated plywood, outdoor carpet, and a handful of 2" wood screws. voila!
middle seat box1(small).jpgmiddle seat box2(small).jpg
I used the center seat's original hinge and strap on this ... the tackle boxes fit just snugly enough that they don't fall out when the box is tipped forward to access the storage area underneath. it's quite solid and strong enough to stand on too.
2010 Tracker ProTeam 175 TXW ~ Mercury 60hp ELPT 4-stroke Bigfoot ~ Minn Kota Maxxum 70#
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Im really impressed with the textured VHT paint I have been using so I needed to repaint my center step anyway I decided to use the textured paint and I think it turned out really nice. I updated pics at the first comment.
Last edited by TritonTRXV8; 10-01-2014 at 02:28 PM.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
If anyone wants the center box that I had posted above, I'll give it away. Local pickup of course, its to big and heavy for me to hassle with shipping.
That was a nice setup Matt im sure someone will want it.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.