Phase 3 on my 300 HPDI
Phase 3 on my 300 HPDI
Phase II on my 150.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hornytoad »</TD></TR><TR><TD CLASS="quote">Phase II on my 150.</TD></TR></TABLE>
And it runs like a raped ape! eeeeeeeeeeeeehaaaaaaaa!
I thought I would be on Easy Street by now but somehow I missed the off ramp!
Sportmaster thanks to HT
Modified by spider1 at 1:08 PM 7/19/2008
Modified by spider1 at 11:17 AM 7/20/2008
Modified by spider1 at 11:30 AM 7/20/2008
Phase 2 and modded HPDI lower unit on a 300 HPDI.
Modified by Rebel1 at 7:56 PM 12/17/2010
Connor, that is bad arse
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wayne Worthy »</TD></TR><TR><TD CLASS="quote">Connor, that is bad arse </TD></TR></TABLE>
If I could just get to run now!
Here is mine Phase III with 16 inch mid section and 1:62 Sportmaster
200 2.6 hpdi heads/tuner/reeds/solid mounts.
1998 bullet 20xd 2006 225 sport xs
Wayne now that is one bad azz looking motor, but you have to get a new pic with the stroker and can that bullet!!!!
Connor.........you haven't noticed that there is no "H" in Hydro Tec
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wayne Worthy »</TD></TR><TR><TD CLASS="quote">Here is mine Phase III with 16 inch mid section and 1:62 Sportmaster
</TD></TR></TABLE>
That is totally cool !!!
Oh yeah I have all the goodies on my 92 Pro V 150 what a huge difference !!!
Heads, tuner. reads, carbs, oil pump ,mounts
Phase III in my little 250.
I have a Hydro Tec Sticker does that count
I've got a Yamaha hat with Hydro-tec on the back!!!
That Wayne Worthy handed to me personally!!!
Hey Keith, scared to put up your stuff huh
NO........... I've got " THE WORKS "
That is an understatement!!!! Keith how is the Minnesota Missle?
Marty