List Your Bullet Set-ups and Performance Numbers...

[QuickBullet]

20XDC - Fresh '95 Merc 2.5 - 260 w/New Nic, SS Wizards, Exhaust Chest, Rod Slots, Mild Porting and Brucato ACU set on 9000 limit!
Dyno's 311hp@8700rpm
Sport Master 1.87
14" Rapid Jack
26 ProMax Prop
1.50 above pad
With Full Fishing Load, 190# of batteries, 2-PowerPole Pro's, Minn Kota, Fishing Gear and 1/2 tank of fuel it runs 90@7600rpm and don't care to string it out! That's fast enough to show my ass to the Cookie Cutters!!!

[falconpilot]

2019 21 SST w/300R
Ultrex 36
2-Garmin 12"
Full Fish Load
3/4 Fuel
Livwells Full
One 250lb driver
90 degree outside/water temp 80
97.4 with 32 5 Blade
94 with 32 Bravo FS
More to go..

[21XRD BULLET]

Tuesday, I will be adding a 2021 250 Pro XS to my 2008 21XRD.

Thinking about a Bravo XS 25P

What would you recommend for the following?

* Inches below pad = ?
* Pitch Prop = ?
* Prop = Tempest or Fury or Bravo, etc?
* PVS holes = Yes or No

I've been told that I cannot expect to run my 28P Bravo XS1 at 3/4" below pad with the new Pro XS.

Recommendations, please.

Thanks in advance.

[KHNC]

Tuesday, I will be adding a 2021 250 Pro XS to my 2008 21XRD.

Thinking about a Bravo XS 25P

What would you recommend for the following?

* Inches below pad = ?
* Pitch Prop = ?
* Prop = Tempest or Fury or Bravo, etc?
* PVS holes = Yes or No

I've been told that I cannot expect to run my 28P Bravo XS1 at 3/4" below pad with the new Pro XS.

Recommendations, please.

Thanks in advance.

Well, thats probably true. I cant run my 27p BXS past 5600 with my new motor. Probably going with 25p BFS on mine instead of XS.

[KHNC]

UPDATE:

2018 Bullet 22SF
2020 Merc 250 Pro XS
27p Bravo 1 XS- 4 holes Plugged
6000 rpm 79 mph
Atlas JP-not sure of exact height at max rpm, gauge set on 3, motor in top hole of plate.