CMap Discover Card Help

[bwhitley]

I have a 2 year old CMap Discover Card NA Y200 that was installed in a Carbon 12 on my Consol and the Card was working fine. The Carbon 12 went bad and I replaced the Carbon 12 with a Lowrance Pro 10 that has the CMap On board option and that is working fine now. I inserted the Old CMap Discover Card into my Carbon 12 on the Bow to use for mapping and now it does not work,can anyone tell me what could be happening as to why it will not work. It comes up as Chart Options it list CMap NA Y200, Navionics , Lowrance as Options & I chose CMap. The HDS Pro 10 will ask for Chart Options as CMap Onboard, Navionics & CMap NA Y200 as Options.I have the CMap Onboard selected. I was under the impression that you had to have a separate Card for the Consol unit because The CMap Onboard in the HDS Pro 10 could not be shard.
Help please !

[pavement]

I purchased the download only option and I had to register a single graph for it. I cannot write any cards for any other graphs but the one I registered. I wanted a card in both graphs so the bow did not have to load from network, but they shut that plan down. This may be true with your card also. Just a thought.........

[tj]

Is High Resolution Bathymetry turned ON?

My Discover M-NA-Y200.49 FEB 2021 mSD received the 7/21/2022 (28.19 GB) map update.
Discover mSD was used in my bow Ti2 9 in 2022.
Same Discover mSD was moved to my console Ti2 9 in 2023.

[bwhitley]

Did you contact them to get this information.

[Basshopper]

They will share perfectly using the card you cannot share interenal maps..

[lpugh]

go to their site and register the MFD serial and ID numbers, then it will work
May have to pay for update if it has expired
This is done via the GoFree app, cannot be done with a phone

[bwhitley]

Thanks, just got this figured out, going to go and try to insert in graph to find out if it works.