196 champion jacket plate bolts

[HASLAG]

What should I put on them to seal them and what is the torque on them

[SCOTT196]

Marine silicon and real tight!

[RickCamilleri]

55 lb from jog plate to transom and I believe it's 90 Jack plate to motor.
To seal them use 3M 4200

[HASLAG]

Thanks

[Passionre]

55 lb from jog plate to transom and I believe it's 90 Jack plate to motor.
To seal them use 3M 4200

^^^^^THIS^^^^^^

[ChampioNman]

Correct on the torque but any marine silicone for above/below waterline works just fine and you won't lose gel coat when you remove them.

[86 inches]

Avoid 3M 5200. It is a strong adhesive and will be very difficult to remove in the future.

C Man turned me onto Starbrite marine silicone sealant years ago and that has always worked well for me. The 4200 is great and I really like the workability of 3M 4000 UV.