Is it possible to "stack" a conventional 2D image on top of a Di image for viewing? I've seen it on you tube but my Helix 4gn doesn't seem to be able to do that? Am I missing something?
Is it possible to "stack" a conventional 2D image on top of a Di image for viewing? I've seen it on you tube but my Helix 4gn doesn't seem to be able to do that? Am I missing something?
Not with a Humminbird unit.
Lowrance has that, it's call FishReveal.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I don't know what you mean by "stack", but I have had several combination screens with 2 to 4 panels on both Solix and Apex where I have 2D displayed over the DI imaging. The attached picture shows an example. Although many people prefer the fish arches in 2D, I find the DI more helpful in my Striper trolling outings. Sometimes the combination of both is helpful though.
Unfortunately, with Helix, you can't define your own custom views... You only have what Humminbird has defined in the software.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
Bullet, What items are you trying to change? and why. There are so many items you can change it can get confusing. Look at some of the Helix tube stuff. Use the simulator to try all of them and get a feel for what you can enhance or tone down or anything else. Don’t do much of the practice while you are trying to fish. The Technological angler has great HB info on finders. He knows how to teach.(is a collage professor). Have fun learning!! Bob
Tell me where has a slow movin' once quick draw outlaw got to go
The Helix gives me a screen with three images. 2D on top, DI on bottom and Chart on the left. I'd be a happy camper without the chart on that view. Saw what I am looking for on a you tube article but unsure how they got it.
I don't have access to my Helix at the moment but go into "views" and make sure they're all set to "visible" then go back to your regular sonar screen and scroll through the different views and you'll see all the different combinations. If it isn't there then it isn't possible.
So one pane above the other is what you want. Helix units don't have that view and you cannot create any custom views with a Helix.
If you want that view, you will need a SOLIX or APEX. Then you can create most any combination of a 2-pane, 3-pane, or 4-pane.
The older number name small square screens had that view-----
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL