Humminbird Helix not showing water temp on chart screen

[Shore]

I've selected advance menus>layouts>selected individual readouts>navigation readouts.
Temp shows up in sonar charts but not the chart only screen.
All I get is depth speed and COG/bearing.

It's a Helix 5 Di gen2

[Wayne P.]

The Overlay readouts are not customizable.
Yes that overlay changes from Temp f to direction t for chart views.

You can turn on the Boxes readouts and customize those.

[Shore]

The Overlay readouts are not customizable.
Yes that overlay changes from Temp f to direction t for chart views.

You can turn on the Boxes readouts and customize those.

ok, so I can't find where to select "boxes". I've never seen them.

thank you.

[Shore]

ah, I found it. However, now my depth is not showing on any screen. if I look for the depth box it's not there on chart view. If I select it while on overlay, it's an option. It's on the trailer with a thru hull. Sonar is on. Hmm.

[Wayne P.]

ah, I found it. However, now my depth is not showing on any screen. if I look for the depth box it's not there on chart view. If I select it while on overlay, it's an option. It's on the trailer with a thru hull. Sonar is on. Hmm.

You won't have a depth readout on the trailer. The unit measures water depth via sound pulses.

[Shore]

got it, will put in water and check it out. Thank you!