My bow unit will not display the depth on my screen overlay. It just shows 3 dashes where it should be. It tracks the bottom just fine and auto ranges as it should. I have a 3n1 ducer on the ghost and it is showing the correct ducer when I check settings. Any ideas? When I use a split screen display with side scan it will show the depth on the sonar page but I’m guessing it’s getting the reading from the 3n1.
Last edited by bbqpitboss; 03-11-2024 at 08:54 AM.
2020 Caymas CX21 Pro
Mercury 250 Pro XS
Serial# 2B686100
Lowrance Ghost
Lowrance HDS Lives
Pages, Settings, Network, Data Sources. Open the Sonar tab, open the Temp tab. Select This Unit. Tap the triangle on the right side and select Scope, Local for everything.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
It’s actually the depth I’m having the issue with, but now I know what I need to check. Thanks Eric
2020 Caymas CX21 Pro
Mercury 250 Pro XS
Serial# 2B686100
Lowrance Ghost
Lowrance HDS Lives
Oops, sorry. My bad. But same place
2004TR-21X/2015 250 ProXS
2B112175
Reply With Quote