Here is what's working so far . I cut an A-rig tube in sections . Much easier than a rubber band . Just thought I would share.
. arig 2.jpga rig.jpg
Here is what's working so far . I cut an A-rig tube in sections . Much easier than a rubber band . Just thought I would share.
. arig 2.jpga rig.jpg
2004 Stratos 285 Pro XL 150 Hp Optimax OT862351
Paper towels tube work
Buy a small piece of PVC pipe, cut each piece either 6 or 8inches each or longer and smooth out the inside and outside edges
Slide mine is card board tube, its nice because I can cut them to length so the baits all stay inside the tube.
Tube slides right over the rod if you want to do it that way also.
I just use an O-ring similar to how styler is doing it with the A-rig tubes. I just slide the O-ring up and behind the head and fish it with the O-ring still on the bait kind of loose behind the head. Doesn't make a difference.
I use the little ring that gets created when a water bottle or soda bottle is opened. They don't take up much room, aren't very heavy and if I lose it in the boat, all I have to do is open another water. I fish it with the ring on - it pretty much stays on the surface or on the rod tip when reeling in.
2013 Ranger Z520c, 2013 Yamaha 250 SHO
2018 Ranger RT198p, 2013 Mercury 150 Optimax