Any Problems ML 1.29 to 1.3 and Ultrex i-pilot link?

[RonH54]

My setup: Networked Helix12MDI G2N,Helix12MDI G4N,Helix10MSI G4N,Ultrex i-pilot link and ML all thru Network Ports. When I went to 1.29 on ML I got the TM interference and HB replaced the ML and everything is great. I like to keep everything updated and I have 3 separate SD cards each loaded with newest updates for my Helix 12 and 10 G4Ns and ML 1.3. Now question, has anyone with similar setup and had HB replace your ML after 1.29 update now Flashed the newest updates for the Helix and ML and had any problems and or interference reappear?

Thanks

[Wayne P.]

The LIVE RFI issue is a hardware issue, not software. The hardware issue is resolved by replacing the LIVE with one that doesn't have the defect.

[RonH54]

Thanks Wayne. I had read the 1.29 exposed the Hardware problem so I figured everything will be fine with newest update. Just wondering if anything odd/new has happened to anyone with the new 1.3.

[Wayne P.]

The only new issue is the Spotlocks being saved on the Chart view.

Spot Lock waypoints not deleting (bbcboards.net)