Pro XS 150 SN. 3B510566
Looking for the proper SSR hub kit for a new Tempest Plus Prop.
Do they really need to be torqued to 100ft. lbs? Sure seems like a lot?
Pro XS 150 SN. 3B510566
Looking for the proper SSR hub kit for a new Tempest Plus Prop.
Do they really need to be torqued to 100ft. lbs? Sure seems like a lot?
2005 Triton TR-186
2024 Mercury Pro XS 150
The SSR hubs for 1" shafts. The Mercury and Quicksilver versions are the exact same. Seems they are now priced exactly the same too where as you used to be able to buy the Quicksilver version a little cheaper. Yes they torque to 100ftlbs and yes that is a lot but it works. Don Weed advises for a 3-blade prop to split the torques into thirds and rotating as you work up. So pin one of the blades against the anti-vent plate with a piece of 2x4, torque to 33ftlbs, rotate the prop to the next blade and torque to 67ftlbs, rotate to the last and torque to 100.
John Walker - Matthews NC
2021 Ranger RT198P - Mercury 150 4S - Enertia Eco
VesselView Link - MotorGuide Tour Pro - Lowrance Carbons
And the Part Numbers are in the FAQ Section under "SSR Hub Kits".
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
