2017 Mercury 225HP Pro XS
S/N: 2B398995
Installed VesselView this off season and wondering what numbers I should be seeing for the following:
Coolant Temp
Coolant PSI
Oil Temp
Oil PSI
Anything else I should be looking out for?
Thanks
2017 Mercury 225HP Pro XS
S/N: 2B398995
Installed VesselView this off season and wondering what numbers I should be seeing for the following:
Coolant Temp
Coolant PSI
Oil Temp
Oil PSI
Anything else I should be looking out for?
Thanks
2017 Nitro Z20 Pro
2017 Mercury 225hp Pro XS
Your motor will not show oil temp, or oil pressure
Coolant temp and pressure varies with operating conditions
Thanks. Just sitting in my garage with the VV on I thought I got an oil temp reading but I’m assuming that’s just ambient temp or something?
As for the coolant temp and pressure, are there some parameters that I can watch out for to make sure everything is working as it should?
Watch for temp AT IDLE to achieve at least 120 degrees F before attempting to accelerate. On EVERY start.
Water pressure minimums:
1-3 psi at idle
15 psi @ WOT (prefer to see 18+ for safe measure in turns).
As Savage pointed out, oil temp and oil pressure are not available on your Optimax engine model.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor