Power Pole Move external transducer mount?

[Koma]

Anyone heard of someone having one yet or working on one?

[KandKKustomz]

transducer shield and saver has 1

[Koma]

Thanks kevin, I'll check them out

[KandKKustomz]

Thanks kevin, I'll check them out

[BassBoatWired]

Makes me wonder if Fish Obsessed make a mount that will work. They have them to fit Ultrex, Force, Ghost and now the Quest. We sell and support them. Can you tell me the shaft Outside Diameter? One if these other brand shafts may fit. I will reach to Fish Obsessed tomorrow and fine out.

[Rick McFaul]

Makes me wonder if Fish Obsessed make a mount that will work. They have them to fit Ultrex, Force, Ghost and now the Quest. We sell and support them. Can you tell me the shaft Outside Diameter? One if these other brand shafts may fit. I will reach to Fish Obsessed tomorrow and fine out.

I have a Fish Obsessed mount on the shaft of my Move for an LVS34. I did wrap some electrical tape around the shaft of the Move first to slightly increase the diameter. So far so good.

[Rick McFaul]

transducer shield and saver has 1

I didn't see one on their site.

[Koma]

I didn't find one on transducer saver's website either Rick. and yea, I have a mount for the LVS 34, looking for 2D and side scan transducer mount

[KandKKustomz]

I didn't find one on transducer saver's website either Rick. and yea, I have a mount for the LVS 34, looking for 2D and side scan transducer mount

we shared the post on our facebook page
https://www.facebook.com/share/p/pp1...ibextid=qi2Omg

[KandKKustomz]

I think we're talking about a mount for the 2D / DI imaging transducer for the trolling motor not the shaft LVS34 mount. I already have a Fish Obsessed mount. They're very nice.

yes correct Aaron is confused what the OP asked for.

[KandKKustomz]

Since Aaron brought up the Fish Obsessed mount. My fish obsessed 0 degree mount from my ultrex fits the PowerPole move without issue. no tape was needed. tighten up and go

[BassBoatWired]

Confusion can be easy sometimes, my mindset is in livescope mode.

[KandKKustomz]

Confusion can be easy sometimes, my mindset is in livescope mode.