Network two 93sv units, which cable?

[JasonK94Z]

I’m mounting a 93sv at my console and the bow. To network the two together, I’m assuming I need a network cable. Can someone point me to the right one to use please? Thanks!

[fishin couillon]

You dont say exactly what 93sv units you have so i'm gonna assume you have the Plus or newer units.....with that said, link below is the network cable needed. It does come in different lengths so get the one that you need.

https://www.garmin.com/en-US/p/1132/pn/010-10551-00

[goodman_fishing]

You'll need the ethernet cable.

[JasonK94Z]

You dont say exactly what 93sv units you have so i'm gonna assume you have the Plus or newer units.....with that said, link below is the network cable needed. It does come in different lengths so get the one that you need.

https://www.garmin.com/en-US/p/1132/pn/010-10551-00

They are ECHOMAP UHD 93sv with GT54UHD-TM Transducer purchased in November 2020

[fishin couillon]

They are ECHOMAP UHD 93sv with GT54UHD-TM Transducer purchased in November 2020

Ok....the link above is what you need....just figure out what length....typically the 20' will do....

[JasonK94Z]

Ok....the link above is what you need....just figure out what length....typically the 20' will do....

thank you

[JasonK94Z]

You'll need the ethernet cable.

20ft (ad) https://amzn.to/3NAIa5b
6ft (ad) https://amzn.to/3Tz8Ua9

Thank you!

[MonteSS]

We are assuming you do not have Livescope and do not plan to get it. If you were to add LS, you would need a network hub box.

[JasonK94Z]

We are assuming you do not have Livescope and do not plan to get it. If you were to add LS, you would need a network hub box.

correct. Will not be able to afford that for awhile. Then it would be a trolling motor with spot lock before that anyways.

Thanks all!!