Total Performance Boats

[BULLET FAN]

Well that would have been one of my last guesses.

[WVBullet]

Mine too. I figured I’d be a 26.

[Rebel1]

The prop calc math doesn't add up, does it?

[WVBullet]

Not really. Did you buy the prop new or off an individual?

[21XDC]

Somehow the 4 strokes defy the slip figures. They run smaller pitch propellers

[WVBullet]

I didn’t know that. I wonder if it has to do with torque.

[BassCatDan]

I’m a fan of Bullet Boats and have always admired them. I bought my BassCat Cougar in 2001. My hat that came after purchase was basically the one posted. So it’s no new slogan.

Keep rocking those amazing Bullets.

[av]

I’m a fan of Bullet Boats and have always admired them. I bought my BassCat Cougar in 2001. My hat that came after purchase was basically the one posted. So it’s no new slogan.

Keep rocking those amazing Bullets.

I swear that hat and slogan was around forever, I used to fish with a guy in the mid 90's that had a Pantera he had that hat and jacket to match.

[BEEZER]

Fury’s usually run an inch stuffer than they are stamped.

[21XDC]

Fury’s usually run an inch stiffer than they are stamped.

Yes, They run stiffer.

[Rebel1]

Not really. Did you buy the prop new or off an individual?

Bought it new.

[SUSHII]

25 Fury

I'm spinning a "24" on my sho. Sure makes it fun out the hole and in the mid!

[av]

I'm spinning a "24" on my sho. Sure makes it fun out the hole and in the mid!

24? I run a 28 bravo its a beast out of the hole , I would think a 24 would peg the rev limiter pretty easy.

[SUSHII]

24? I run a 28 bravo its a beast out of the hole , I would think a 24 would peg the rev limiter pretty easy.

I spin it 68-6900. It's stamped 24 but the scorpions seem to run a tad stiff.

my boat came with a 28 bravo and I wasn't a fan of it at all. That was when I had 14" of set back though. Haven't tried one since.

[Wwmansfi]

I spin it 68-6900. It's stamped 24 but the scorpions seem to run a tad stiff.

my boat came with a 28 bravo and I wasn't a fan of it at all. That was when I had 14" of set back though. Haven't tried one since.

What set back are you running now? Is that a 3 blade you’re running now if so does it handle any different? I don’t think I’ve heard of anyone running a 3 blade on a XRS.

[SUSHII]

What set back are you running now? Is that a 3 blade you’re running now if so does it handle any different? I don’t think I’ve heard of anyone running a 3 blade on a XRS.

il running 16" total now and this prop probably handles better than most of the set ups I've owned. I prefer it over the bravo for sure. Yes it is a 3 blade.

[Bullet 250]

I run a 25 Bravo XS most of the time for fishing

[av]

I spin it 68-6900. It's stamped 24 but the scorpions seem to run a tad stiff.

my boat came with a 28 bravo and I wasn't a fan of it at all. That was when I had 14" of set back though. Haven't tried one since.

What flash you running to get to 6900? I have a Hydro Tech flash set at 6500 I thought their max was 6800? That's a lot of revs

[SUSHII]

What flash you running to get to 6900? I have a Hydro Tech flash set at 6500 I thought their max was 6800? That's a lot of revs

I had it flashed at Cajun Outboards they use hydro tech. There is a 7k and even a 7500 now. I have the 7k in mine. It feels and sounds good at 6800!

[av]

I had it flashed at Cajun Outboards they use hydro tech. There is a 7k and even a 7500 now. I have the 7k in mine. It feels and sounds good at 6800!

Wow 7500 sounds like a risk , when I talked to hydro tech they recommended the 6500 they talked me out of going 6800 , anyway that's cool