When you take micro sd card out of the sd adaptor how can you tell which one is which?
When you take micro sd card out of the sd adaptor how can you tell which one is which?
With ONIX/SOLIX/APEX, you go to the Settings, select Chart, then select Chart Card Info.
With number series/Helix, you go to the GPS Diagnostic view and it will be at the bottom right.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
A VX card will have VX on the microSD card, just won't show which region.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks
Yeah, this is definitely a problem with the Micro-SD format. I bought a fine tipped white paint pen I use to mark mine on the back side.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
One more question since I have the expert's on line. When you update software, you have to restore default settings. Is there a way to save MY settings so I don't have to re-enter them all after system update?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
The update will always wipe out your customizations, even if you don't do a Restore Factory Defaults. It's always a safe bet to do the Restore Factory Defaults before and after an update.
To save your custom settings on the Solix and Apex, go to Home and then select the Files Utility. There you can export your settings. After you do the update, you can go to the Files Utility and Import your settings. This is not always allowed after an update so you should always keep good notes on your customizations. Also, not all settings are saved, like custom views and Data Overlays.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
It would be time well spent to do screen captures of your settings. Just in case you get stumped on one of those settings you have to drill down a few menus deep to find. At least with my old memory.
Tell me where has a slow movin' once quick draw outlaw got to go
2020 Caymas CX20 Pro, Mercury Pro XS 250 4 stroke, SN 2B735045
Helix 15 msi G4N, Helix 12 msi G3N, Helix 12 mdi G4N, Solix 12 G1
Mega 360, Mega Live w/ Targetlock, 8' Raptors,
Minkota Ultrex 112 w/Ipilot Link, (2) 5 Port Switches
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
2020 Caymas CX20 Pro, Mercury Pro XS 250 4 stroke, SN 2B735045
Helix 15 msi G4N, Helix 12 msi G3N, Helix 12 mdi G4N, Solix 12 G1
Mega 360, Mega Live w/ Targetlock, 8' Raptors,
Minkota Ultrex 112 w/Ipilot Link, (2) 5 Port Switches