Trailer question

[Bassmaster96]

Bought a trailer with the bulldog type c coupler on it. It will not fit any of my drop hitches because the front of the coupler rubs the hitch. Is there a good drop hitch out there for these style couplers, or what do you guys do that have them? It works fine with a flat hitch, but I really need at least some drop on this truck I want to pull it with.

[Transom]

I would call up etrailer or another vendor like that and explain your problem. I would wager they can get you a drawbar that has enough depth in that measurement to work for you.

[scstarr]

I have an adjustable alumhttps://www.amazon.com/ANDERSEN-HITCHES-Rapid-Hitch-Adjustable/dp/B06XWNLNPK/ref=asc_df_B06XWNLNPK/?tag=hyprod-20&linkCode=df0&hvadid=312153119455&hvpos=&hvnetw= g&hvrand=191124312957510185&hvpone=&hvptwo=&hvqmt= &hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9024586&hvta rgid=pla-569825572240&psc=1#:~:text=Sponsored-,ANDERSEN%20HITCHES%20%7C%20Rapid%20Hitch%20%7C%20 Best%20Adjustable%20Ball%20Mount%20%7C%206%22%20Dr op/Rise%2C%202%20%2D%202%2D5/16%22%20Plate%20Steel%20Dual%20Ball%20%7C%20Fits%2 02%22%20Receiver%20%7C%203410,-Submitinum one , take a measurement of yours and I can measure the depth on mine if that helps drop me a PM

[mikeky]

Curt has a 2" drop ball mount where the drop is about a 45* angle, don't know if this might give you the needed clearance.

[Bassmaster96]

Thanks everyone for the responses. After doing some measuring and comparison, I went ahead and grabbed a Curt drop mount like Mike mentioned and put the correct ball on it. It is close but has plenty of clearance. I appreciate all of the responses