Been through this thing a few times throwing parts at. 52 inch ultrex 112 thrust us2 model, fished a tournament in some heavy rain and had the power switch go out on it. Replaced and worked fine until got home and tested and no power. Replaced with new one, still no power. Replaced control board inside bottom of foot pedal. Still nothing What really stumps me is I have 36volts to bow. But when I hook up the foot pedal power cords it reads at the same location at 13.7 volts? Still no power. I opened up the bottom of foot pedal and double checked all connections against minn Kota schematics and it correct. Fuse in head is good. Checked for continuity from all wires and it’s there. When I disconnect the foot pedal power wires from the trolling motor batteries I get 36.8volts again. Any help would be greatly appreciated. Thanks BBC.