Results 1 to 3 of 3
  1. #1
    Member PaulGifto's Avatar
    Join Date
    Jan 2008
    Location
    Brampton, Ontario, Canada
    Posts
    663

    2002 ZX225 needs seats

    Anyone out there got any pics of an older ZX225 with replacement aftermarket seats? Looking at the Lebroc TZX but not 💯 confident they will fit properly. Any help or suggestions are appreciated

    PG
    Paul Gifto
    2013 Nitro Z9 2021 250hp Mercury ProXS
    Ontario Canada 🇨🇦

  2. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    967
    #2
    I had my seats (2002 zx200) re-upholstered 4 years ago by a local professional for $500 Cdn for both seats, center seat and butt seat. My foam was in perfect condition...if not, it would have cost much more I was told. I removed the seats and pulled all the staples (there were a LOT of staples, as that's a tedious job that they don't like to do so it saved me $$). I was 100% happy with the job and doing this there were no potential issues with fit. And you can pick any colours you want. Just an idea...
    p.s. To get quotes, just remove one seat bottom and back (only takes about 10 minutes) and take them around to upholsterers. That way they can see the condition of foam and know they won't have to mess around with removal/installation or deal with the boat itself, so the cost will be less because of no "unknowns".
    new seats.jpg
    Last edited by McQuaig; 05-24-2023 at 09:23 AM.
    2002 Skeeter ZX200
    2018 200SHO

  3. Member
    Join Date
    Aug 2018
    Location
    Conroe/Milam Tx.
    Posts
    97
    #3
    20230305_172347.jpghttps://www.bassboatseats.com/collections/bass-boat-seats/products/56-bass-boat-seats Only pic I had on my phone. I used Bass Cat universal console.