Went out yesterday she was a little hard to start . Got it fired up ran down the lake everything was fine ,stopped to fish a spot went to start and nothing buttons all light up and nothing.
Running a 225 Etec 2006 model ranger Z20.Any thoughts ?
Went out yesterday she was a little hard to start . Got it fired up ran down the lake everything was fine ,stopped to fish a spot went to start and nothing buttons all light up and nothing.
Running a 225 Etec 2006 model ranger Z20.Any thoughts ?
There is a 10amp fuse on the motor. Pull the hood ,my etec has it top right looking to the back. My dealer helped me with this.
I can't find a fuse .I guess I will wait until the shop can look at it .That's in middle of June soonest they can get to it.
Life goes on thanks for your help.
Reset the breaker next to the starting battery. It might fix it.
Don Blume
2018 Ranger Z520C
2018 Mercury 250 Pro XS 2B525775 2-Stroke
Past Rigs
2008 Triton Tr186 with Mercury 175 Pro XS
2000 Ranger R73 with Mercury 125
1976 Basscat with 150 Mercury
That didn't work, it's going to the shop on the 5th that's the soonest I can get in.
Do you have the keyed bypass start switch for the boat? The one that plugs into the harness and bypasses the touchpad?
Before you bring it in, I'd try that to see if it's the pad/brain system or not. Have read on here a few controllers and/or pads have needed replacing.
A simple pad controller reset may help, disconnect the battery for a bit, reconnect leads and try it. Not sure, but 30mins seems to come to mind. Or search on here as I've read it before.
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC