Will cutting barrel length down on a prop reduce stern lift? I am running lithium batteries and I need less stern lift and more bow lift. My prop has a flared barrel. Though maybe taking a 1/4-3/8 of inch off.
Will cutting barrel length down on a prop reduce stern lift? I am running lithium batteries and I need less stern lift and more bow lift. My prop has a flared barrel. Though maybe taking a 1/4-3/8 of inch off.
The flare is also an exhaust diffuser. Removing some will lessen stern lift, but you run the potential to let exhaust get on blade tips and blow out on Holeshot.
Last edited by 21XDC; 05-17-2023 at 10:59 AM.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Seems like a common issue. I just asked Mike about doing this the other night!!!
2011 Ranger z521/2023 250ProXS
I sent a prop to Mark to be blue printed and he shave some the barrel. I dont know how much he removed or if he just squared the end up. I could see the machining marks. But to your question, it is my understand that this is done to reduce stern lift.
2023 Triton 18TRX
2023 Mercury 200 Pro XS
80# Ultrex IPilot Link
Helix 12 Mega SI & Garmin Livescope w/ 1242XSV GPSmap
Lower the motor and add 2 more inches of setback
Thank You Leon Pugh
I added 2 inches of setback when i put lithiums in my 521c runs better than it did with the agms
04 521VX 250 Pro XS
14 521C 250 Pro XS