Thread: Fuel fill line

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Oct 2007
    Location
    Haughton, La
    Posts
    4,467

    Fuel fill line

    I'm going to be doing a few things to my boat over the summer, adding the backflow, check valve, burb valve, whatever you wish to call it. Does anyone have the fill hose size? I've looked at in the past but don't remember. Old timers, I guess!
    2014 Phoenix 721XP, 250 SHO, Bobs Action Jack, Dual Blades, 112 Ultrex, 2019 Lariat FX4 F150 Supercrew 4x4

  2. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #2
    you are adding or replacing? the 2014 should have came with a check valve, we removed and bypassed them on 2 of my buddies 2013 and 2014
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  3. Member
    Join Date
    Oct 2007
    Location
    Haughton, La
    Posts
    4,467
    #3
    Probably going to remove for testing. I've had the deck off. The fuel entry on the tank is on the opposite side of the boat from the fill cap. That's a pretty long run of horizontal hose to a 90 going into the tank. I will remove and look at the valve. Just looking at this point for a reasonable solution. I removed the charcoal filter, can't say it helped any. Already made sure of the vent hose installation and the fill hose.
    2014 Phoenix 721XP, 250 SHO, Bobs Action Jack, Dual Blades, 112 Ultrex, 2019 Lariat FX4 F150 Supercrew 4x4