I had him add more cup and he reworked it to get my rpm's a little higher. I ran it this weekend and 67.6 mph loaded with 2 people. I'm now within .5 mph of my old mercury. I have noticed that the new motor likes to run higher than the mercury 2 stroke.
Opening up the prop vents to half open helped and I was between 3500 and 4000 RPM on my holeshot with 3 people and full livewell.
I didn't notice much of a difference with the prop to pad height higher, but I do notice that I only have to trim the motor up 3/4 on my gauge to get my best performance. Going full trim height is losing grip and the rooster tail is higher than the top of the motor.
2008 Ranger Z520 DC 2016 Suzuki 250SS
1997 Javelin 400TDC 1997 Johnson 200 Venom
Maybe you guys that have ran the scorpion can give me an idea on what I need to order. I have a 19 charger 210 elite and am currently running a 28p Suzuki 4 blade and get 5600 rpm and running about 64ish. I have looking at the scorpion just not sure if I should go with a 27p or 26p
Go with a 27P and that's what I'm running on my BC Lynx, which is a pretty heavy boat as well. Also, don't be afraid to try a PT Prop BRV4 since it's a lot cheaper than a Bravo 4 prop.Originally Posted by bradpage
https://www.getaprop.com/powertech-b...uki-150-300-hp
2018 Bass Cat Lynx w/Suzuki 250SS.
Ok I appreciate the response
Reply With Quote