Know where I can find the light strip that goes behind the bullet cut out? Are the bulbs replaceable for this?
Know where I can find the light strip that goes behind the bullet cut out? Are the bulbs replaceable for this?
Make some from suspended ceiling light panels. From any home center.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I use these and they work great. Come in several colors.
HYADA DC 12V Waterproof 1Ft White LED Strip Underbody Light with 6 inches wires for motor (Pack of 6) https://a.co/d/5U0BtFp
2008 BULLET 21XD 2007 Merc 300xs
2008 BULLET 21XD 2007 Merc 300xs
Glad to hear you have going your way! Behind the panel on the main beam, I cleaned off a spot with acetone and used RTV silicone. It does a good job holding. The last light strip I installed was about 5-6 years ago and it’s still holding in good. If it loosens, I’ll clean it and do the same. A quick easy way that keeps me from drilling to use clips. And yes, only one strip per side.
Last edited by WVBullet; 05-17-2023 at 02:53 PM.
2008 BULLET 21XD 2007 Merc 300xs
Did you change out the plastic behind the Bullet letter cut-out?
No I didn’t have to. It’s always been white and very clean looking. If yours is fading do like Mike mentioned and cut out a panel from a ceiling light. He has a great idea there.
2008 BULLET 21XD 2007 Merc 300xs
I have two sets of white cutout backers if anyone needs them. I changed my last two trailers to red. This may be illegal in some states but I also have a sheet of red plexi if anyone wants to make some red ones.
‘17 Bullet 21 SDC ‘20 Merc 300R 1.60 SM 1E081012