Anyone know someone, more knowledgeable than me to do some electronics rigging on my boat. Want to move a Helix 7 G4N from bow to console & add a Helix 9 G3N and Mega Live up front & run wires. In L. Bucks County.
Anyone know someone, more knowledgeable than me to do some electronics rigging on my boat. Want to move a Helix 7 G4N from bow to console & add a Helix 9 G3N and Mega Live up front & run wires. In L. Bucks County.
2023 BassCat Sabre FTD
2023 175 Pro XS
Do you have a trip west maybe for some Yough smallmouth? Can knock that out in an hour or two. I just did 5 boats over winter and I have one coming as soon as the guy buys his Helix 9. Basically the same thing. Move his 7 to the dash and mount the 9 up front.
I see you have a Cat? It really is a simple job that anyone can do. I would do it for you at no charge, just cost of wire.
when you see this on the water stop and say hi.
I probably just need to have at it and watch a couple you tubes. The power cable that came with it is short. I was thinking it , (the 9), would have to be hard wired back to the battery. The current 7 up front is not
2023 BassCat Sabre FTD
2023 175 Pro XS
http://indepthinstalls.com/
Located near Harrisburg if you want it done right
I do it but you are about 2 hours away. I'll PM you in a bit to run a few things past you that may help with install
Joe Galada - Tamaqua, PA
2004 Ranger 521VX - Yamaha 250 SHO
NJ Trolling Motors : Authorized Minn Kota Motor Guide Warranty & Repair : Central NJ
right down Int 195 at the Jackson exit (Great Adventure Park)
Allen
911 Bass Anglers
Bucks County PA
Hawghead marine between Harrisburg and York.
Are you still needing some rigging done? 570-664-4322 text
Did I myself with a Buddy. Delete thread
2023 BassCat Sabre FTD
2023 175 Pro XS