I have finally decided to pull the trigger and replace the carpet on my 2008 Nitro. Years ago I spilled 1/2 bottle of bang attractant and it destroyed the glue and rubber backing on the front deck (I have been hiding it with a similar color truck floormat). Carpet is 20oz ordered from Bassboatseats.com. I have decided to use carpet adhesive for the deck and contact cement for edges and lids (don't trust myself with just cc for everything. For the adhesive I ordered AAT390(use to be Birdsong). Anyone who has used this could you let me know how it went good or bad and any advice for using it.
Old carpet was put down with contact cement and is coming right up. Should the fiberglass be scuffed up prior to laying the adhesive or should I be ok. Based on searches here I will be leaving the trim down and tucking carpet underneath.