Power pole bracket

[Skeeter Man]

Will the S-2-6 brackets from my CM 1 PP set work if I went with a new CM 2 PP setup on the same boat? If so, any issues? Thanks.

[Hydrilla Gear]

Yes they will carry over with no issues at all. Same boat = same brackets. The only exceptions would be if you currently have non braced S26 brackets and are going to 10' Poles.

10' Power Poles require BRACED adapter plates. In this case simply purchase the additional braces for your current S26 brackets.

OR

If you are changing the amount of setback or jack plate size on the boat. Not always but sometimes you may need to change adapter plates to compensate for the setback.

Power Pole has used the same bolt pattern on every generation and model anchor since day 1

[Skeeter Man]

Yes they will carry over with no issues at all. Same boat = same brackets. The only exceptions would be if you currently have non braced S26 brackets and are going to 10' Poles.

10' Power Poles require BRACED adapter plates. In this case simply purchase the additional braces for your current S26 brackets.

OR

If you are changing the amount of setback or jack plate size on the boat. Not always but sometimes you may need to change adapter plates to compensate for the setback.

Power Pole has used the same bolt pattern on every generation and model anchor since day 1

Thanks Rich