Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2016
    Location
    Georgia
    Posts
    224

    1997 Hydrasports 205R

    Picked up a used 1997 Hydrasports 205R without a motor and floor needing to be re-done.

    Anyone has any feedback or details about this boat? Any watch outs?

    Floor needs to be redone and already cut out. Stringers seems to be okay despite foam area being wet.

    Also, anywhere good place to get replacement parts (i.e. front black cover on bow near trolling motor area)

  2. Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,614
    #2
    There is a big boat junk yard on the north side of Lake Lanier. You might find some stuff you need there. C and O Marine in Tn might have something also.

  3. Member
    Join Date
    Nov 2023
    Location
    North Webster, Indiana
    Posts
    1
    #3
    xavierisu, How did your floor project turn out?
    I have a 1992 Hydra Sport 185, between the 2 seat I have a soft spot. I pulled the whole middle carpet area up and found roughly a 36"x24" area of soft rotten word. Once I pulled that up, actually most of that flooring broke apart, but under that I found 3/4 pieces of saturated styrofoam pieces.

    Did you run into that on your floor replacement?